EcoMarble Technical Resources & Installation Video | Australia

EcoMarble^™A Nusfun product

中文 Request Samples

For architects, designers, installers and partners

EcoMarble Technical Data & Installation Resources

Product information, responsible-use guidance and controlled documents for EcoMarble™ projects in Australia.

Standard product format

≈ 4.5 mmNatural marble layer

≈ 2 mmCementitious composite backing

≈ 6.5 mmNominal total thickness

Standard panel size: 1200 × 600 mm. Larger and project-specific formats, including sizes up to 1500 × 1200 mm, may be available subject to stone selection, manufacturing feasibility and project confirmation.

Responsible use

Crystalline silica

The cementitious composite backing contains 0% crystalline silica. Natural marble may contain naturally occurring crystalline silica. Crystalline silica identified in whole-panel testing is attributable to the natural marble layer, not the backing. The complete panel is not described as silica-free.

Cutting and fabrication

Use appropriate stone-cutting controls when cutting, drilling or grinding. Wet-cutting methods or suitable dust extraction, appropriate PPE and applicable workplace safety procedures are required.

Wet-area walls

Suitability depends on substrate, waterproofing, sealing, adhesive selection, joint detailing and installation method. EcoMarble is not a substitute for a waterproofing membrane.

Fire and exterior use

No blanket fire rating or exterior suitability is claimed. Any fire, wind, moisture, fixing or façade use requires project-specific evidence and technical assessment.

An Australian Border Force tariff / classification pre-assessment outcome has been received for the current EcoMarble product pathway. Import duty, GST and shipment treatment remain dependent on the final declared value, tariff classification and circumstances of each consignment. Third-party reports are shared only within their tested scope.

Australian import status

ABF pre-assessment outcome received

The current EcoMarble product pathway has received an Australian Border Force tariff / classification pre-assessment outcome. This does not replace shipment-specific customs entry, valuation, GST or other import requirements.

Australian technical status

Product categoryGenuine natural marble composite panel

Standard format1200 × 600 × 6.5 mm

BackingCementitious composite · 0% crystalline silica

Natural marble silicaNaturally occurring silica may be present

Adhesive systemCompatible S1 system under evaluation

Fire / exterior / façade useProject-specific evidence required

General Handling & Installation Demonstration

This practical video demonstrates general handling, positioning and installation procedures for EcoMarble™ panels.

General demonstration only. Actual installation requirements depend on the substrate, waterproofing, adhesive system, stone selection, joint detailing and project conditions.

For project-specific installation guidance, request the current controlled EcoMarble technical documents.

Controlled documents

EcoMarble technical documents are aligned to the current 6.5 mm product specification. Current controlled PDFs are supplied on request so project teams can confirm the latest issue, stone specification, test scope and project applicability before use.

Current document set

Product Introduction · Technical Data Sheet · Installation Guide · Partner Overview · Responsible Use & Safety.

Request Current Documents

Document control

Always verify the issue date, stone specification, test scope and project applicability before external use. Only the current controlled document set should be used for live projects.

Need a controlled document or sample?

Tell us about your role and project so we can provide the most relevant current information.

Contact EcoMarble